Rainwater Pre-Tank Filters 

OASIS Pre Tank Rainwater Harvester Filter

This filter is located prior to the Storage Tank and caters for larger roof areas

The filter comes with a plastic shaft extension tube and locking lid.

This extension permits an easy adjustment to on site and It is also possible to use several extensions in combination.

The two stage cleaning system gives a high level of filtering efficiency, independent of flow rate.

Due to the steep inclination of the filter cartridge the dirt is continuously cleaned away into the sewer / overflow.

Suitable for roof areas up to 350 m².

Max. Flow Rate Sieve insert 1.5 L/sec = 5.4 m³ cleaned water per hour.

Height difference between inlet and outlet of 300 mm.

The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commercial buildings, in public buildings and in industry.

The filter has to be cleaned every 6 months depending on the contamination.

Pre-Tank Rainwater Harvesting Filter image

How it works

1. Rainwater builds up and is equally distributed across the cascade.

2. The primary cascade filters out the largest dirt particles such as leaves and moss.

3. Pre filtered water then flows over the secondary filter sieve (mesh size 0,65 mm). Due to the special mesh structure of the sieve, any remaining dirt is filtered out and the filter is self cleaning to a large degree thus requiring little maintenance.

4. Filtered water flows to the tank.

5. Dirt goes to the sewer / overflow.

OASIS Rain Water Harvesting - Free Water From Nature

The Byre, Foggathorpe, Selby, North Yorkshire, YO8 6PX

Tel 01757 289423

Email oasis@crystaltanks.com

Rainwater Harvesting Systems and Tanks from OASIS - HOME

Site Powered By
    WebKeeper WebSite Builder
    Online web site design